LMJ Bright Painting Services
← All articles Cabinet Refinishing Services in Tampa: Pricing and Process Comparison

Cabinet Refinishing Services in Tampa: Pricing and Process

Last Updated: October 30, 2026

Quick Summary

Cabinet refinishing in Tampa typically costs $2,500 to $5,500 for a sprayed full kitchen project, covering full prep, repairs, bonding primer, and sprayed topcoats with off-site door finishing. Smaller kitchens with roughly 12 to 18 fronts commonly run $1,800 to $2,800, while large kitchens with 40 to 60 fronts can reach $4,800 to $7,500 or more.

  • Refinishing keeps your existing doors and applies a new finish; refacing replaces doors and covers box faces.
  • Door and drawer count is the single biggest pricing lever for any refinishing quote.
  • Insist on a written estimate naming prep steps, primer, topcoat count, and exclusions.
  • Ask for a day-by-day schedule in writing and what could push it.
  • Wipe finished cabinets with a damp cloth and mild soap, and touch up chips early.

Table of Contents

What Cabinet Refinishing Services in Tampa Actually Include

Cabinet refinishing starts with one question most homeowners never ask: what is actually being done to your cabinets? Refinishing is the process of cleaning, sanding, repairing, priming, and applying a new finish to your existing cabinet boxes and doors, rather than replacing them. At LMJ Bright Painting Services, we build every cabinet project around a documented scope, because preparation is what determines whether a finish lasts.

Professional painter sanding a cabinet door during a kitchen cabinet refinishing project in a Tampa home.
Professional painter sanding a cabinet door during a kitchen cabinet refinishing project in a Tampa home.

A real refinishing scope covers more than a coat of paint:

  • Degreasing and cleaning every surface, since kitchen grease defeats adhesion
  • Removing doors and drawers and labeling each one for reassembly
  • Sanding, filling dings, and repairing loose joints or peeling veneer
  • Priming with a bonding primer suited to the existing finish
  • Spraying or brushing a topcoat, usually two coats
  • Reinstalling hardware, or installing new pulls and knobs

Kitchen Cabinet Refinishing Cost: What Drives the Number

Refinishing cost in any quote generally comes down to labor, and labor depends on how many doors and drawers you have, how much repair the boxes need, and how complex the layout is.

That is why two quotes for the same kitchen can land hundreds or thousands of dollars apart without either contractor being dishonest. One is pricing a documented prep sequence and two finish coats; the other is pricing a scuff-and-spray. The number only means something once you know what sits behind it.

Typical Price Ranges by Service

Use the ranges below as a benchmarking tool, not a quote. They reflect common patterns for full kitchen cabinet projects in the local market and assume a mid-size kitchen with roughly 25 to 35 doors and drawers, standard-height cabinets, and no major structural repair. Your written estimate should replace every number here.

Service Typical Project Range (USD) What It Generally Covers
Cabinet painting (brush and roll) $1,800 - $3,500 Cleaning, light sanding, primer, two topcoats, hardware reinstall
Cabinet refinishing (sprayed) $2,500 - $5,500 Full prep, repairs, bonding primer, sprayed conversion-varnish or lacquer topcoats, off-site door finishing
Cabinet refacing $4,500 - $9,000 New doors and drawer fronts, box veneer or laminate, new hardware
Full cabinet replacement $8,000 - $20,000+ New boxes, doors, and installation; layout changes priced separately

Illustrative Budgets by Kitchen Size

Door and drawer count is the single biggest pricing lever, so the same service scales sharply with kitchen size. These illustrative budgets assume sprayed refinishing with a standard two-coat system and no unusual repair:

  • Small galley kitchen, roughly 12 to 18 fronts: commonly $1,800 - $2,800
  • Medium kitchen, roughly 25 to 35 fronts: commonly $2,800 - $4,800
  • Large kitchen with island and pantry run, roughly 40 to 60 fronts: commonly $4,800 - $7,500 or more

Add for glass-front uppers, island panels, built-ins, and tall pantry cabinets, each of which needs individual handling. Add more for water damage near the sink, peeling thermofoil, or loose hinges, all of which consume prep hours before a single coat goes on.

What Moves You Up or Down the Range

  • Door and drawer count, a major factor in the scope of work
  • Repair scope, filling, veneer repair, and joint tightening add labor
  • Layout complexity, islands, pantries, and built-ins add handling time
  • Finish system, different finishes involve different application methods
  • Access and containment, tight kitchens and occupied homes need more masking and protection time

Ask whether your quote is built per-door or as a flat project price, and ask what happens if the count changes after measurement.

Cabinet Refinishing vs. Refacing: Which Fits Your Kitchen

Refinishing keeps your existing doors and drawer fronts and applies a new finish to them. Refacing keeps the boxes but replaces the doors and drawer fronts with new ones and covers the box faces in matching veneer or laminate.

Choose refinishing when your doors are solid and structurally sound but dated in color. Choose refacing when the doors themselves are damaged, warped, or a style you cannot live with. Refacing changes the door style, which refinishing does not. To compare against refacing, see Professional Cabinet Painting in Tampa: Process & Costs.

Approach What Changes Best For
Refinishing Finish only, same doors Sound doors, dated color
Painting Finish only, brush or spray Same as refinishing
Refacing New doors and box veneer Damaged or unwanted door style
Replacement Entire cabinet boxes Failed boxes, layout changes

What a Kitchen Cabinet Painting Estimate Should Spell Out

A kitchen cabinet painting estimate should list, in writing, exactly what is included and what is excluded before you schedule or pay anything.

Insist on seeing these lines:

  • Surface preparation steps, named specifically, degreasing, sanding grits, filling, caulking
  • Primer product by name and the number of topcoats
  • Whether doors are sprayed off-site or on-site, and where they are stored while curing
  • Hardware removal and reinstallation, including whether new pulls are supplied or you provide them
  • Repair allowances, how much filling and veneer repair is included before a change order kicks in
  • Protection of counters, floors, and appliances, including containment and ventilation setup
  • What triggers a change order, and the hourly or per-item rate for it

What Quotes Commonly Leave Out

Most estimates are not dishonest; they are incomplete. These are the exclusions that show up most often, and each one has a price attached:

  • Interior cabinet box faces, many quotes cover doors and drawer fronts only; painting the inside of boxes is a separate line
  • New hardware, pulls and knobs are frequently excluded or billed at retail plus markup
  • Glass-front and open shelving, interior finishing and shelf painting are add-ons
  • End panels and toe kicks, visible side panels are sometimes treated as extra surface area
  • Appliance removal and reinstallation, moving a range or refrigerator to reach adjacent cabinets may be billed separately
  • Wall and ceiling touch-up, masking protects surfaces, but it does not repair them
  • Disposal, old hardware, sanding debris, and masking materials have a removal cost
Watch Out An estimate that says "prep included" without naming the steps is the one most likely to grow once work begins. Get the exclusions in writing too, an exclusion you have read is a cost you can plan for.

How to Compare Two Estimates Line by Line

Put two quotes side by side and compare them in this order, not by bottom line:

  1. Door and drawer count, if the counts differ, the prices are not comparable
  2. Prep sequence, count the named steps; more steps usually means more labor and a longer-lasting finish
  3. Coating system, primer plus how many topcoats, and what product
  4. Spray versus brush, sprayed work prices higher but produces a different surface
  5. Inclusions and exclusions, line them up against the list above
  6. Schedule and warranty, written dates and written coverage

A lower quote that omits parts of the scope describes a smaller project. The fairest comparison is scope against scope.

Build a free estimate →

Key Takeaway Ask every contractor to quote the same written scope. When all bids describe the same work, the numbers become comparable, and the lowest one is genuinely the lowest.

FTC consumer guidance on home improvement contracts explains what a written contract should contain, including the scope, price, and payment schedule.

How Long Does Cabinet Refinishing Take?

How long does cabinet refinishing take? Schedules depend on door count, dry time between coats, and whether doors are sprayed off-site. A smaller kitchen generally finishes faster than a large one.

The clock is not just painting time. Doors come off, get cleaned and sanded, then primed, then coated, and each stage needs cure time before the next. Reassembly and hardware go last. Ask your contractor for a day-by-day schedule in writing, and ask what could push it. For rental turnovers, that schedule is the thing to hold them to.

Durability, Warranties, and Maintenance After the Final Coat

Durability depends heavily on preparation, including cleaning, sanding, and using a suitable primer.

Maintenance is simple once the finish cures. Wipe with a damp cloth and mild soap, avoid abrasive pads, and touch up chips early. Ask what the warranty covers and for how long, and get it in writing. A warranty that covers peeling and blistering is worth more than one that covers only "workmanship" in vague terms. U.S. EPA guidance on safe paint handling and ventilation is worth a read before any interior coating project.

Comparing Local Estimates Without Getting Burned

Comparing estimates means comparing scope, not just the bottom line. A lower number may reflect a narrower scope, such as fewer prep steps or fewer topcoats.

Use this checklist on every quote you receive:

  • Is prep itemized, not summarized?
  • Is the door and drawer count stated?
  • Is the primer and topcoat count stated?
  • Is the schedule written down with dates?
  • Are exclusions listed?
  • Is the warranty in writing?
  • Is the person quoting the person doing the work?

Ask directly who will be in your home. As a veteran-owned company, we are happy to answer that question, and you can reach the owner directly by phone or message. FTC consumer guidance on home improvement contracts explains what a written contract should contain.

Build Your Free Cabinet Refinishing Estimate

Our free smart estimator helps you start, and an in-person visit verifies the scope before final pricing. You receive a written scope before scheduling or payment.

Just tell us what you would like painted, and we will take it from there.

Frequently Asked Questions

How much do cabinet refinishing services cost in Tampa?

Pricing depends on door and drawer count, cabinet condition, finish choice, and how much repair work is needed first. For current prices, see the LMJ Bright Painting Services pricing page, or request a written estimate after an in-person look.

Is cabinet refinishing cheaper than cabinet refacing?

Refacing replaces every door and drawer front plus the visible veneer, while refinishing keeps your existing fronts and changes the surface. Refacing gives you a different door style, and refinishing preserves the profile you already have. If your boxes are solid and you like the door style, refinishing may suit you; if the doors are damaged or dated, refacing may make more sense.

How long does cabinet refinishing take?

The schedule depends on door and drawer count, the amount of sanding and repair, how many coats the finish needs, and cure time between steps. Ask for the timeline in writing with the start date, the days your kitchen is unusable, and the completion date, so you can plan meals and household routines around it.

What should a cabinet refinishing estimate include?

A usable estimate names the door and drawer count, the prep steps (cleaning, sanding, deglossing, caulking, repair), the primer and finish products, the sheen and color, protection of counters and floors, and whether hardware reinstallation is included. It should also state what is excluded, such as glass panels, interior cabinet faces, or appliance moves. Get the scope in writing before any payment or scheduling.

Is it worth refinishing cabinets instead of replacing them?

If your cabinet boxes are structurally sound and the layout works, refinishing may avoid the demolition and countertop disruption that come with new cabinets. Replacement wins when boxes are water-damaged, the layout needs to change, or you want a different door profile. Have a contractor verify box condition in person before you commit either way.


Cabinet projects go wrong when the scope stays verbal. We would rather define the work, document the prep, and price it clearly before a single door comes off the hinges. Get started with LMJ Bright Painting Services and build a free estimate with a written scope, room-by-room planning, and direct access to the owner from first call to final coat.

GoogleAdd lmjbrightpainting.com as a preferred source on Google →